MT 5 Plastic Injection Molding Products 2 Socket POM Fixing Clamp UL94V-2 20 X 10mm
General Brief
Plastic injection molding fixing clamp has two sockets in base that is used to support secure places for another part , two rectangle clamp on both sides to fix part further .
Material
Plastic injection molding fixing clamp part is made from POM with white color .
Specification
| Length |
25 |
| Width |
8 |
| Height |
12 |
| Thickness |
4 |
| Chamfer |
0.5 x 45° |
Tolerances
General tolerances is +/- 0.1mm and refer to ISO 2768 – m for unspecified dimensions .
| Basic Sizes |
Level |
| MT6 |
| A |
| 0-3 |
0.13 |
| 3-6 |
0.16 |
| 6-10 |
0.19 |
| 10-14 |
0.23 |
| 14-18 |
0.26 |
| 18-24 |
0.3 |
| 24-30 |
0.35 |
| 30-40 |
0.4 |
| 40-50 |
0.47 |
| 50-65 |
0.55 |
| 65-80 |
0.64 |
ISO 2768- m tolerances
All are in millimeters
Tolerances values based on “ ± “ .
Mechanical Property
| Tensile strength MPa |
62 |
| Elongation at break % |
60 |
| Bending strength MPa |
98 |
| Modulus of elasticity for tension MPa |
2830 |
| modulus of elasticity for bending MPa |
2600 |
| Compressive strength MPa |
110 |
| Shearing strength MPa |
54 |
| Notched Impact Strength(J/m) |
65 |
| HR hardness |
80 |
| Friction |
0.15 |
| Fatigue MPa |
31 |
Electrical Performance
| Specific volume resistance Ω·cm |
10 |
| Specific inductive capacity(10Hz) |
2.7 |
| Dielectric loss tangent (10Hz) |
0.007 |
| Dielectric strength(kV/mm) |
20 |
| Arc-resistances |
240 |
Thermal Performance
| Heat distortion Temperature(1.82MPa)℃ |
124 |
| Normal working temperature ℃ |
100 |
| Working temperature arrange ℃ |
-40℃～100℃ |
| Coefficient of linear expansion (×10K) |
8.5 |
| Heat conduction W/(m·K) |
0.23 |
Typical Features
High mechanical strength
Tensile strength can be up 50.5MPa . close to metal properties . and only a tiny change on mechanical strength even working temperature has a large change .
Good wear resistant
Wear resistant strength still keeps 35MPa or so even item is put 10 J variable load . it is best compared to items that with PA,ABS,HPVC,PS,PC
Resistant impact
POM has good impact resistance but inferior to ABS and PC , Impact performance will be down 90% or so if there is breaking on or in product .
Self-lubricant
POM parts with F4 , C ,MoS2 ,PE and lubricant elements that improve self-lubricant performance .
Stability in dimensions
POM part with good tensile strength and hardness that not easy to be deformed and broken .
Resistant Organic solvent
POM parts are resistant for hydrocarbon ,alcohol ,ether ,aldehyde , gasoline ,lubricant and Weak Alkalis .
Good insulation
POM items nearly not be effected by temperature and humidity on insulation . insulation is related with the thickness of items , eg when thickness is 0.127mm insulation is 82.7kV/mm,thickness is 1.88mmi insulation is 23.6kV/mm
Please contact us for more information for plastic injection molding fixing clamp , and we will give you professional suggestions and help you to design .
Product Tags:
|
|
MT 5 Plastic Injection Molding Products 2 Socket POM Fixing Clamp UL94V-2 20 X 10mm Images
|
